marton lee - define your space
standard range ML-500

This range consists of:
Low unit

  • Wall unit
  • Shelving
  • coming soon…



    This piece is: 2400mm (l) x 870mm high* x 555mm wide    (* with TV retracted into the unit)

    :: Size



    Plinth – recessed under the body of the unit and enhances the cabinet’s ‘presence’ by imparting a sense of ‘floating/separateness’

    :: Base




    Touch to Open – a spring loaded mechanism fitted inside the cabinet which removes the need for a visible handle and gives the front of the unit its clean, uncluttered appearance.

    For

    use with – drawers and doors

    :: Door opening




    There are two options offered for the construction:

    • 1/3of the unit (top, side and drawer fronts) – American Oak NTV (Natural timber veneer) with balance ¾ (top, side, doors / drawers)   – 2 pot lacquer
    • 1/3 ofthe unit (top, side and drawer fronts) –   Macassar or Zebrano RTV (Reconstituted timber veneer) with balance ¾   (top, side, doors / drawers) – 2 pot lacquer

    In turn, each of these options is available with a range of finishes:

    • American Oak NTV – has four stain options: Natural, Blonded, Dark Oak or Charcoal * (See below for sample image. Note actual cabinet may vary from the sample due to the inevitable variation which can occur when staining a natural timber product). All of these come with a clear satin sealer coat.

    (* other stains are available on request – an $80.00 fee per cabinet applies)

    • Macassar/Zebrano RTV – the distinct and individual appearance of these two RTVs removes the rationale for staining. Each has a clear Matt sealer coat – the matt is chosen to enhance the unique colour and grain consistency which is such a feature of RTVs.
    • 2 pot lacquer – is available in white (as standard) but can also be supplied with any colour from the current Resene range (an $105.00 fee per cabinet applies for all non-standard colours). All colours are available in either a ‘Satin’ (30% gloss)   or ‘Gloss’ (off the gun) finish.

    :: Exterior Construction and
        Finish



    The cabinet carcass, including back and shelves, is constructed from melamine board which has a tough, scratch resistant and easy to clean surface.

    :: Interior Construction




    The TV lifter unit is the ‘Rise Easy 2′ which is made in Denmark using a Bosch gear motor. The key features are:

    • 100kg lifting capacity
    • RF (radio frequency) remote – works thru solid surfaces (no need for infrared receiver)
    • Monitor bracket fits standard VESA (Video Electronics Standards Association) – most TVs are VESA compatible
    • Suitable for sizes up to 52” (LCD, LED, Plasma)
    • Full 3 year warranty

    All the other hardware used in the units, which includes drawer runners, hinges and touch to open catches, is of premium quality from Europe’s most reputable manufacturers.

    :: Hardware




    The ML-500 is configured with a combination of cavity (for TV storage) and shelves or shelves and drawers.

    Externally there is the choice of: 4 doors or 2 drawers + 3 doors (see detail below)

    Internally there is the choice of: drawers or shelves (see detail below)

    :: Configuration



    Delivery within Auckland between Albany and Takanini (excluding Waiheke and the other Gulf islands) is $80.00 plus GST. For deliveries outside this rea, a quotation will be provided.

    Delivery is made by a specialist furniture courier service that guarantees our furniture will arrive in perfect condition and at the time arranged (or, in the event of unavoidable delay, you will be informed promptly).

    :: Delivery