This piece is: 2400mm (l) x 870mm high* x 555mm wide    (* with TV retracted into the unit)

Plinth – recessed under the body of the unit and enhances the cabinet’s ‘presence’ by imparting a sense of ‘floating/separateness’

Touch to Open – a spring loaded mechanism fitted inside the cabinet which removes the need for a visible handle and gives the front of the unit its clean, uncluttered appearance.

For

use with – drawers and doors

There are two options offered for the construction:

• 1/3of the unit (top, side and drawer fronts) – American Oak NTV (Natural timber veneer) with balance ¾ (top, side, doors / drawers)   – 2 pot lacquer

• 1/3 ofthe unit (top, side and drawer fronts) –   Macassar or Zebrano RTV (Reconstituted timber veneer) with balance ¾   (top, side, doors / drawers) – 2 pot lacquer

In turn, each of these options is available with a range of finishes:

• American Oak NTV – has four stain options: Natural, Blonded, Dark Oak or Charcoal * (See below for sample image. Note actual cabinet may vary from the sample due to the inevitable variation which can occur when staining a natural timber product). All of these come with a clear satin sealer coat.

(* other stains are available on request – an $80.00 fee per cabinet applies)

• Macassar/Zebrano RTV – the distinct and individual appearance of these two RTVs removes the rationale for staining. Each has a clear Matt sealer coat – the matt is chosen to enhance the unique colour and grain consistency which is such a feature of RTVs.
• 2 pot lacquer – is available in white (as standard) but can also be supplied with any colour from the current Resene range (an $105.00 fee per cabinet applies for all non-standard colours). All colours are available in either a ‘Satin’ (30% gloss)   or ‘Gloss’ (off the gun) finish.

The cabinet carcass, including back and shelves, is constructed from melamine board which has a tough, scratch resistant and easy to clean surface.

The TV lifter unit is the ‘Rise Easy 2′ which is made in Denmark using a Bosch gear motor. The key features are:

• 100kg lifting capacity
• RF (radio frequency) remote – works thru solid surfaces (no need for infrared receiver)
• Monitor bracket fits standard VESA (Video Electronics Standards Association) – most TVs are VESA compatible
• Suitable for sizes up to 52” (LCD, LED, Plasma)
• Full 3 year warranty

All the other hardware used in the units, which includes drawer runners, hinges and touch to open catches, is of premium quality from Europe’s most reputable manufacturers.

The ML-500 is configured with a combination of cavity (for TV storage) and shelves or shelves and drawers.

Externally there is the choice of: 4 doors or 2 drawers + 3 doors (see detail below)

Internally there is the choice of: drawers or shelves (see detail below)

Delivery within Auckland between Albany and Takanini (excluding Waiheke and the other Gulf islands) is $80.00 plus GST. For deliveries outside this rea, a quotation will be provided.

Delivery is made by a specialist furniture courier service that guarantees our furniture will arrive in perfect condition and at the time arranged (or, in the event of unavoidable delay, you will be informed promptly).